Showing all 11 results
(Screwed)
SALIENT FEATURES :
Screwed in Bonnet, Piston Type with a provision of installing pressure gauge at down
stream side, Screwed female ends to BS 21.
TEST PRESSURE
(Hydraulic) 21.1Kg/cm?
S.S. 410 Stem with Bronze Working parts.
Conforming to IS 14846 PN1L6, PD type Flanged ends
as per IS 1538
(Screwed)
SALIENT FEATURES :
Screwed in Bonnet,
2 Piece Design, Lever Operated with PVC
Sleeve. Screwed female ends to IS 554,
Conforming to IS 9890. —
Water type, leaver/gear operated compatible to insertion between flnages of BS 10 , ASA class 150
Conforming to IS 13095
Straight pattern, stop type, nodular cast iron body, bronze trim, PN16, flanged
STRAIGHT PATTERN (Flanged)
SALIENT FEATURES :
Qutside Screw, Yoke type &
Rising stem with backseat arrangement, SS 410
Renewable Working Parts, Handwheel operated,
Straight Pattern. Design Standard BS5152,/ DIN 86251
Flanged ends as per DIN 2533 RF for PN-16
Sizes upto 150mm & DIN2532 RF PN-10 for 200mm.
TEST PRESSURE
(Hydraulic) Seat: 16Kg/cm? Shell 24Kg/cm?
(Steam) Seat: 13Kg/cm? Max. Working Temp. 220°
SALIENT FEATURES :
Bolted Bonnet, Non Rising
S.S. 410 Stem with Bronze Working parts.
Conforming to |S 14846 PN1L.6, PD type Flanged ends
as per IS 1538
SALIENT FEATURES :
Bolted Bonnet, Non Rising
S.S. 410 Stem with Bronze Working parts.
Conforming to IS 14846 PN1L6, PD type Flanged ends
as per IS 1538
VALVES THREE PIECE DESIGN (Screwed)
SALIENT FEATURES :
Bolted Connector, S.S, 304
Ball & Stem, Screwed Female Ends BSP taper
Threads to BS 21, Design Standard BS 5351
Full bore Three Piece Design.
TEST PRESSURE
(Hydraulic) Seat :40 Bar, Shell: 76 Bar
(Steam) Seat:40Bar Max. Warking Temp. 425°
Designed to ISO
Flange standard: AP1609.BS EN558.DN3202
Flange ANSI B16.5/BS4504/ EN 1092-2
Ari Valve for drinking water and neutral liquids up to 80°C
The air release component releases entrapped air in pressurized systems
Air & vacuum component admits large volumes of air during drainage and at water column separation
Dynamic design allows for high velocity air discharge while preventing premature closure
Simple and reliable structure , small dimensions, lightweight
SALIENT FEATURES :
Outside Screw, Yoke type &
Rising stem with backseat arrangement, SS 410
Renewable Working Parts, Handwheel operated,
Right Angle Pattern. Design Standard BS5152/,
DIN 86251, Flanged ends as per DIN 2533 RF for PN-16
sizes upto 150mm & DIN2532 RF PN-10 for 200mm,
TEST PRESSURE
(Hydraulic) Seat: 16Kg/cm? Shell 24Kg/cm?
(Steam) Seat: 13Kg/cm? Max. Working Temp. 220°