Specification
| Brand | |
|---|---|
| Material | Cast Iron, Stainless Steel |
Leading Dealers in Pipes & Valves
Select a vehicle to find exact fit parts
Cast iron track heavy duty wheel
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time
Diamensional details of V-groove, Square groove and Flange for
wheels having 25 mm width, 32 mm width and 50 mm width are
as per drawings given.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Hardness of Casting : ( 175 ±10 ) BHN.
You must be logged in to post a review.
Related products
-
Agood quality rubber compound bonded ( molded ) over a cast iron core forms a Bonded
Rubber Tyre Wheel. The load carrying capacity as well as life of BRT wheel is much more
than that of SRT wheel. Castings can be returned back to us for re-bonding of rubber
when it is worn out.Hardness of Rubber : (85 ± 5 ) on Shore ‘A’ scale.
Grade of the casting : FG 200 as per IS-210
0 Maximum Working Temperature : 50 C
-
These wheels are manufactured by compression molding shredded cotton fabric,
soaked in good quality phenolic resin. The hardness of fibre wheel is higher than the
hardness of UHMW wheel. As a result, the chances of steel burr lying on the shop floor
getting embedded in the wheel surface are remote. The acidic or alkaline chemicals have
little effect on these wheels.Hardness of Wheel : ( 90 ± 5 ) on Shore ‘D’ scale.
0 Maximum Working Temperature : 170 C
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any timeHardness of Casting : ( 175 ±10 ) BHN
Reviews
There are no reviews yet.