Specification
| Brand |
|---|
Leading Dealers in Pipes & Valves
Select a vehicle to find exact fit parts
Polyurethane wheel PP
These wheels are manufactured from virgin Poly Propylene Co-Polymer (PP-CP),
white in colour, by injection molding. The wheels are light in weight but have fair load
carrying capacity. The acidic or alkaline chemicals have no effect on these wheels.
Hardness of Wheel : ( 80 ± 5 ) on Shore ‘D’ scale.
0 Maximum Working Temperature : 50 C
Related products
-
Light duty castors are suitable for hospital furniture, house hold furniture & equipments, laboratory equipments, food serving
trolleys in hotels & canteen etc. where weight of material to be carried is small. Light duty extra strength castors are particularly
suitable where LD castors fails too frequently & where loads are moderate. Both LD & LD-X castors looks like same. Only difference
is LD-X castors are manufactured from higher plate thickness.Light Duty Stainless Steel brackets are manufactured from stainless steel sheets (SS-304). All other components of bracket such as
kingpin, nut, D.P.cap, spring washer, bolt etc are also of stainless stee
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any timeHardness of Casting : ( 175 ±10 ) BHN
-
These wheels are manufactured by compression molding shredded cotton fabric,
soaked in good quality phenolic resin. The hardness of fibre wheel is higher than the
hardness of UHMW wheel. As a result, the chances of steel burr lying on the shop floor
getting embedded in the wheel surface are remote. The acidic or alkaline chemicals have
little effect on these wheels.Hardness of Wheel : ( 90 ± 5 ) on Shore ‘D’ scale.
0 Maximum Working Temperature : 170 C
-
These wheels are manufactured from virgin Nylon 6, white in colour, by injection molding.
These wheels are light in weight, but have high load carrying capacities. These wheels can be used up to 90 C temperature. The acidic or alkaline chemicals have no effect on
these wheels.
Hardness of Wheel : (90 ± 5) on Shore ‘D’ scale.
0 Maximum Working Temperature : 90 C
Reviews
There are no reviews yet.