Non-skid neoprene acoustical isolation pad
Free and operating height
Top access adjustment bolt turn clockwise to load spring and maintain free and operating height
Bolt length is suitable for 1″ maximum Equipment Base thickness
The M-Series OSM vibration mount is designed for use on machinery that does not require fastening to the floor. It has been designed with the aid of FEM analysis, which prevents fatigue from fast working cycle times and strong lateral forces in heavy machinery.
Replacing the M-series mount is easy – simply unscrew and slide the mount under the machine. The reinforced leveling bolt support cup distributes machine loads to the support points within the mount. The leveling element provides direct and reliable machine mounting to suit most installation needs.
Vertical as well as horizontal forces are dampened out by the integral nitrile pad, which also provides chemical resistance to most fluids.
Hanger for suspending equipment, pipe, or duct work from a ceiling to isolate vibration and noise
Arc-welded steel hanger box for strength and durability
Bridge-bearing natural rubber spring cup for low dynamic stiffness to minimize noise and vibration
Heavy-duty steel spring for absorbing shock and supporting loads
Laterally supported, housed spring type isolator with telescoping equipment support plate, leveling bolt and hold-down nut for attaching equipment.
Springs are supported with a cup on a metal base plate complete with a ribbed neoprene vibration isolation pad, 1/4″ (6 mm) thick, bonded to the base plate.
Steel telescoping housing incorporates neoprene stabilzers that prevent metal-to-metal contact while resisting movement and provides vertical damping.
Minimum 50% additional travel to solid
Minimum kx/ky ratio of 0.8
Constructed from nylon fabric-reinforced neoprene body with forged carbon steel flanges.
Excellent for use with moderate chemicals, most oils, fats, grease, and many solvents.
Features
Reviews
There are no reviews yet.