Medium duty steel castor
Light duty steel castor
₹ 10,000.00
Cast iron track wheel (FLG)
₹ 10,000.00
Cast iron track wheel
₹ 10,000.00
Cast iron track wheel
₹ 10,000.00
Nominal Size: 8″ID x 6″ OAL
Flange: 8″ 150 lb floating
Face to Face Dimension: 6″
Lateral Deflection: (+/- 1/2″)
Axial Extension: ½”
Axial Compression: ¾”
Angular Deflection: 7 degrees
Working Pressure: 225 psig
Maximum Vacuum: 26″ Hgg
Temperature Range: 20 to 250°F
Body Construction: EPDM
Flange OD: 13.5″
Bolt Circle Diameter: 11.75″
Number of Bolt Holes: 8
Bolt Hole Diameter: 0.875″
Recommend Bolt Diameter: 0.75″
Aquaseal10 Integrally-moulded Wafer-type Butterfly Valve is available in sizes from 50 mm (2”) to
600 mm (24”), in PN 10 pressure rating. The valve was developed to provide reliable sealing in water
and air lines, and is today the industry benchmark.
The most striking feature of Aquaseal10 Butterfly Valve is its integrally-moulded body liner.
Aquaseal’s elastomer body seat is vulcanised insitu onto the body using high temperature and
pressure, and this provides longer life and superior performance when compared to valves with loose
liners.
Aquaseal 10 requires no maintenance, and is truly a fit-and-forget valve
Aquaseal 16 Integrally-moulded Butterfly Valve sets a new benchmark in performance for butterfly
valves. The versatile valve is offered in a variety of elastomer-disc combinations to address myriad
process requirements. The highly reliable butterfly valve has successfully completed over 10,000
cycles at its rated pressure.
Available in sizes from 50 mm (2”) to 900 mm (36“), the valve is available in Cast Iron, SG Iron
and carbon steel, in a variety of body styles, materials and actuation options. The body seat of
Aquaseal16 Butterfly Valve is vulcanised insitu onto the body, which provides longer life and superior
performance when compared to valves with loose liners.
Aquaseal Fab Chek Fabricated Steel Check Valve compliments Aquaseal
Max Large-size Fabricated Steel Butterfly in water distribution systems and
power plants. The valve is fabricated from carbon steel plates, and body
and disc seats are hard-faced using 13% Cr steel.
Smooth closure of the valve is ensured by using a counter weight. The
valve can be supplied with hydraulic dash pot to prevent disc slamming
and water hammer. Automated Fab Chek can also be used as combined
shut-off and non-return valve on pump discharge lines.
The valve is available in PN 6, PN 10 and PN 16 pressure ratings, with
flanged ends
Laterally supported, housed spring type isolator with telescoping equipment support plate, leveling bolt and hold-down nut for attaching equipment.
Springs are supported with a cup on a metal base plate complete with a ribbed neoprene vibration isolation pad, 1/4″ (6 mm) thick, bonded to the base plate.
Steel telescoping housing incorporates neoprene stabilzers that prevent metal-to-metal contact while resisting movement and provides vertical damping.
Minimum 50% additional travel to solid
Minimum kx/ky ratio of 0.8
Open Spring Mount comprising laterally stable spring assembled into an upper & lower steel reinforced molded elastomeric load plate and with leveling assembly.
APPLICATION
It is used to isolate sources of noise and vibration of floor mounted equipment.
Reciprocating Air or Refrigeration Compressors
Internal Combustion Engines
Close Coupled & Base Mounted Pumps
Centrifugal Fans
Constructed from nylon fabric-reinforced neoprene body with forged carbon steel flanges.
Excellent for use with moderate chemicals, most oils, fats, grease, and many solvents.
Features
Non-skid neoprene acoustical isolation pad
Free and operating height
Top access adjustment bolt turn clockwise to load spring and maintain free and operating height
Bolt length is suitable for 1″ maximum Equipment Base thickness
The M-Series OSM vibration mount is designed for use on machinery that does not require fastening to the floor. It has been designed with the aid of FEM analysis, which prevents fatigue from fast working cycle times and strong lateral forces in heavy machinery.
Replacing the M-series mount is easy – simply unscrew and slide the mount under the machine. The reinforced leveling bolt support cup distributes machine loads to the support points within the mount. The leveling element provides direct and reliable machine mounting to suit most installation needs.
Vertical as well as horizontal forces are dampened out by the integral nitrile pad, which also provides chemical resistance to most fluids.
Available in numerous configurations, metal expansion joints can be used in temperatures ranging from -420° to 1,800°F (-251° to 982°C) and pressures up to 1,000 psi.
High tensile steel with sylomer anti-slide base.
These are used in sectors such as air compressors, pump and pumping equipment and acoustic isolation of premises.
Conical lateral expansion joint DN 25 – DN 250 · PN 6/10/16 Lateral expansion joint consisting of a conical rubber bellows without convolution and rotable flanges. Synthetic fibre reinforcement.
Applications:
for compensating lateral movement to improve the flow of media (smooth passage) for deposit-free passage of solid matter, e.g. at pumps for gypsum suspension for muffling vibration and noise as conical elastic reducing piece at
• pumps
• pipelines
• motors ventilating fans/blowers
• cooling water lines cement industry conveyance technology
Showing 1–12 of 15 results
