Medium duty steel castor
Light duty steel castor
₹ 10,000.00
Cast iron track wheel (FLG)
₹ 10,000.00
Cast iron track wheel
₹ 10,000.00
Cast iron track wheel
₹ 10,000.00
Nominal Size: 8″ID x 6″ OAL
Flange: 8″ 150 lb floating
Face to Face Dimension: 6″
Lateral Deflection: (+/- 1/2″)
Axial Extension: ½”
Axial Compression: ¾”
Angular Deflection: 7 degrees
Working Pressure: 225 psig
Maximum Vacuum: 26″ Hgg
Temperature Range: 20 to 250°F
Body Construction: EPDM
Flange OD: 13.5″
Bolt Circle Diameter: 11.75″
Number of Bolt Holes: 8
Bolt Hole Diameter: 0.875″
Recommend Bolt Diameter: 0.75″
Aquaseal10 Integrally-moulded Wafer-type Butterfly Valve is available in sizes from 50 mm (2”) to
600 mm (24”), in PN 10 pressure rating. The valve was developed to provide reliable sealing in water
and air lines, and is today the industry benchmark.
The most striking feature of Aquaseal10 Butterfly Valve is its integrally-moulded body liner.
Aquaseal’s elastomer body seat is vulcanised insitu onto the body using high temperature and
pressure, and this provides longer life and superior performance when compared to valves with loose
liners.
Aquaseal 10 requires no maintenance, and is truly a fit-and-forget valve
Aquaseal 16 Integrally-moulded Butterfly Valve sets a new benchmark in performance for butterfly
valves. The versatile valve is offered in a variety of elastomer-disc combinations to address myriad
process requirements. The highly reliable butterfly valve has successfully completed over 10,000
cycles at its rated pressure.
Available in sizes from 50 mm (2”) to 900 mm (36“), the valve is available in Cast Iron, SG Iron
and carbon steel, in a variety of body styles, materials and actuation options. The body seat of
Aquaseal16 Butterfly Valve is vulcanised insitu onto the body, which provides longer life and superior
performance when compared to valves with loose liners.
Aquaseal Fab Chek Fabricated Steel Check Valve compliments Aquaseal
Max Large-size Fabricated Steel Butterfly in water distribution systems and
power plants. The valve is fabricated from carbon steel plates, and body
and disc seats are hard-faced using 13% Cr steel.
Smooth closure of the valve is ensured by using a counter weight. The
valve can be supplied with hydraulic dash pot to prevent disc slamming
and water hammer. Automated Fab Chek can also be used as combined
shut-off and non-return valve on pump discharge lines.
The valve is available in PN 6, PN 10 and PN 16 pressure ratings, with
flanged ends
Agood quality rubber compound bonded ( molded ) over a cast iron core forms a Bonded
Rubber Tyre Wheel. The load carrying capacity as well as life of BRT wheel is much more
than that of SRT wheel. Castings can be returned back to us for re-bonding of rubber
when it is worn out.
Hardness of Rubber : (85 ± 5 ) on Shore ‘A’ scale.
Grade of the casting : FG 200 as per IS-210
0 Maximum Working Temperature : 50 C
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time
Diamensional details of V-groove, Square groove and Flange for
wheels having 25 mm width, 32 mm width and 50 mm width are
as per drawings given.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Hardness of Casting : ( 175 ±10 ) BHN.
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
Hardness of Casting : ( 175 ±10 ) BHN
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time
Hardness of Casting : ( 175 ±10 ) BHN
These are bare cast iron wheels made from good quality graded casting, machinable &
free from blow holes. These wheels have very high load carrying capacity & are suitable
for high-temperature applications like ovens, foundries etc. The only disadvantage of CI
wheels is that they damage the costly floor surfaces.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temperature : 250 C
Hardness of Casting : ( 175 ±10 ) BHN
Laterally supported, housed spring type isolator with telescoping equipment support plate, leveling bolt and hold-down nut for attaching equipment.
Springs are supported with a cup on a metal base plate complete with a ribbed neoprene vibration isolation pad, 1/4″ (6 mm) thick, bonded to the base plate.
Steel telescoping housing incorporates neoprene stabilzers that prevent metal-to-metal contact while resisting movement and provides vertical damping.
Minimum 50% additional travel to solid
Minimum kx/ky ratio of 0.8
Open Spring Mount comprising laterally stable spring assembled into an upper & lower steel reinforced molded elastomeric load plate and with leveling assembly.
APPLICATION
It is used to isolate sources of noise and vibration of floor mounted equipment.
Reciprocating Air or Refrigeration Compressors
Internal Combustion Engines
Close Coupled & Base Mounted Pumps
Centrifugal Fans
Showing 1–12 of 29 results
