Agood quality rubber compound bonded ( molded ) over a cast iron core forms a Bonded
Rubber Tyre Wheel. The load carrying capacity as well as life of BRT wheel is much more
than that of SRT wheel. Castings can be returned back to us for re-bonding of rubber
when it is worn out.
Hardness of Rubber : (85 ± 5 ) on Shore ‘A’ scale.
Grade of the casting : FG 200 as per IS-210
0 Maximum Working Temperature : 50 C
(Screwed)
SALIENT FEATURES :
Screwed in Bonnet, Piston Type with a provision of installing pressure gauge at down
stream side, Screwed female ends to BS 21.
TEST PRESSURE
(Hydraulic) 21.1Kg/cm?
S.S. 410 Stem with Bronze Working parts.
Conforming to IS 14846 PN1L6, PD type Flanged ends
as per IS 1538
(Screwed)
SALIENT FEATURES :
Screwed in Bonnet,
2 Piece Design, Lever Operated with PVC
Sleeve. Screwed female ends to IS 554,
Conforming to IS 9890. —
Water type, leaver/gear operated compatible to insertion between flnages of BS 10 , ASA class 150
Conforming to IS 13095
Straight pattern, stop type, nodular cast iron body, bronze trim, PN16, flanged
STRAIGHT PATTERN (Flanged)
SALIENT FEATURES :
Qutside Screw, Yoke type &
Rising stem with backseat arrangement, SS 410
Renewable Working Parts, Handwheel operated,
Straight Pattern. Design Standard BS5152,/ DIN 86251
Flanged ends as per DIN 2533 RF for PN-16
Sizes upto 150mm & DIN2532 RF PN-10 for 200mm.
TEST PRESSURE
(Hydraulic) Seat: 16Kg/cm? Shell 24Kg/cm?
(Steam) Seat: 13Kg/cm? Max. Working Temp. 220°
SALIENT FEATURES :
Bolted Bonnet, Non Rising
S.S. 410 Stem with Bronze Working parts.
Conforming to |S 14846 PN1L.6, PD type Flanged ends
as per IS 1538
SALIENT FEATURES :
Bolted Bonnet, Non Rising
S.S. 410 Stem with Bronze Working parts.
Conforming to IS 14846 PN1L6, PD type Flanged ends
as per IS 1538
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time
Diamensional details of V-groove, Square groove and Flange for
wheels having 25 mm width, 32 mm width and 50 mm width are
as per drawings given.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Hardness of Casting : ( 175 ±10 ) BHN.
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
Hardness of Casting : ( 175 ±10 ) BHN
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Showing 1–12 of 25 results