Specification
| Brand | |
|---|---|
| Material | Solid Rubber, Stainless Steel |
Leading Dealers in Pipes & Valves
Select a vehicle to find exact fit parts
Solid rubber tyre wheel
The wheel consists of Solid Rubber Tyre clamped between two pressed steel drums with
nuts & bolts. Sintered iron bush / needle roller bearing is provided between two drums.
Tyre is manufactured from good quality rubber compound to ensure long life & good
cushioning effect. The tyre, when worn out, can be replaced easily on sight.
Hardness of Rubber : ( 85 ± 5 ) on Shore ‘A’ scale.
0 Maximum Working Temperature : 50 C
You must be logged in to post a review.
Related products
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.Hardness of Casting : ( 175 ±10 ) BHN
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
-
Medium Duty castors are designed to carry moderate loads i.e. more than LD or LD-X castors, and are suitable for various types of
trolleys used in industries, warehouses, godowns, stores, railway platform and so on. These castors are also suitable for hospital
furniture, laboratory equipments or food serving trolleys where load carrying capacity required is higher & the light duty castors
need frequent replacement
-
Polyurethane with high abrasion resistance bonded ( molded ) over a cast iron core forms
a PU-CI Wheel. PU-CI wheels are manufactured by casting process. The properties of
cast polyurethane are much better than that of injection moulded polyurethane. The load
carrying capacity as well as life of wheel is more than that of PU-PP wheel. PU-CI wheels
have good shock absorption capacity & very low noise level.Hardness of Polyurethane : (94 ± 5) on Shore ‘A’ scale.
0 Maximum Working Temperature : 50 C
-
These are bare cast iron wheels made from good quality graded casting, machinable &
free from blow holes. These wheels have very high load carrying capacity & are suitable
for high-temperature applications like ovens, foundries etc. The only disadvantage of CI
wheels is that they damage the costly floor surfaces.Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temperature : 250 C
Hardness of Casting : ( 175 ±10 ) BHN
Reviews
There are no reviews yet.