Specification
| Brand | |
|---|---|
| Material | Nylon, Stainless Steel |
Leading Dealers in Pipes & Valves
Select a vehicle to find exact fit parts
Nylon wheel
These wheels are manufactured from virgin Nylon 6, white in colour, by injection molding.
These wheels are light in weight, but have high load carrying capacities. These wheels can be used up to 90 C temperature. The acidic or alkaline chemicals have no effect on
these wheels.
Hardness of Wheel : (90 ± 5) on Shore ‘D’ scale.
0 Maximum Working Temperature : 90 C
You must be logged in to post a review.
Related products
-
These are bare cast iron wheels made from good quality graded casting, machinable &
free from blow holes. These wheels have very high load carrying capacity & are suitable
for high-temperature applications like ovens, foundries etc. The only disadvantage of CI
wheels is that they damage the costly floor surfaces.Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temperature : 250 C
Hardness of Casting : ( 175 ±10 ) BHN
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any timeDiamensional details of V-groove, Square groove and Flange for
wheels having 25 mm width, 32 mm width and 50 mm width are
as per drawings given.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Hardness of Casting : ( 175 ±10 ) BHN.
-
Light duty castors are suitable for hospital furniture, house hold furniture & equipments, laboratory equipments, food serving
trolleys in hotels & canteen etc. where weight of material to be carried is small. Light duty extra strength castors are particularly
suitable where LD castors fails too frequently & where loads are moderate. Both LD & LD-X castors looks like same. Only difference
is LD-X castors are manufactured from higher plate thickness.Light Duty Stainless Steel brackets are manufactured from stainless steel sheets (SS-304). All other components of bracket such as
kingpin, nut, D.P.cap, spring washer, bolt etc are also of stainless stee
-
Agood quality rubber compound bonded ( molded ) over a cast iron core forms a Bonded
Rubber Tyre Wheel. The load carrying capacity as well as life of BRT wheel is much more
than that of SRT wheel. Castings can be returned back to us for re-bonding of rubber
when it is worn out.Hardness of Rubber : (85 ± 5 ) on Shore ‘A’ scale.
Grade of the casting : FG 200 as per IS-210
0 Maximum Working Temperature : 50 C
Reviews
There are no reviews yet.