Specification
| Brand |
|---|
Leading Dealers in Pipes & Valves
Select a vehicle to find exact fit parts
Fiber wheels
These wheels are manufactured by compression molding shredded cotton fabric,
soaked in good quality phenolic resin. The hardness of fibre wheel is higher than the
hardness of UHMW wheel. As a result, the chances of steel burr lying on the shop floor
getting embedded in the wheel surface are remote. The acidic or alkaline chemicals have
little effect on these wheels.
Hardness of Wheel : ( 90 ± 5 ) on Shore ‘D’ scale.
0 Maximum Working Temperature : 170 C
Related products
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
-
These wheels are manufactured from virgin Poly Propylene Co-Polymer (PP-CP),
white in colour, by injection molding. The wheels are light in weight but have fair load
carrying capacity. The acidic or alkaline chemicals have no effect on these wheels.Hardness of Wheel : ( 80 ± 5 ) on Shore ‘D’ scale.
0 Maximum Working Temperature : 50 C
-
Polyurethane with high abrasion resistance bonded ( molded ) over a cast iron core forms
a PU-CI Wheel. PU-CI wheels are manufactured by casting process. The properties of
cast polyurethane are much better than that of injection moulded polyurethane. The load
carrying capacity as well as life of wheel is more than that of PU-PP wheel. PU-CI wheels
have good shock absorption capacity & very low noise level.Hardness of Polyurethane : (94 ± 5) on Shore ‘A’ scale.
0 Maximum Working Temperature : 50 C
-
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.Hardness of Casting : ( 175 ±10 ) BHN
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Reviews
There are no reviews yet.