Medium duty steel castor
Light duty steel castor
₹ 10,000.00
Cast iron track wheel (FLG)
₹ 10,000.00
Cast iron track wheel
₹ 10,000.00
Cast iron track wheel
₹ 10,000.00
Nominal Size: 8″ID x 6″ OAL
Flange: 8″ 150 lb floating
Face to Face Dimension: 6″
Lateral Deflection: (+/- 1/2″)
Axial Extension: ½”
Axial Compression: ¾”
Angular Deflection: 7 degrees
Working Pressure: 225 psig
Maximum Vacuum: 26″ Hgg
Temperature Range: 20 to 250°F
Body Construction: EPDM
Flange OD: 13.5″
Bolt Circle Diameter: 11.75″
Number of Bolt Holes: 8
Bolt Hole Diameter: 0.875″
Recommend Bolt Diameter: 0.75″
Agood quality rubber compound bonded ( molded ) over a cast iron core forms a Bonded
Rubber Tyre Wheel. The load carrying capacity as well as life of BRT wheel is much more
than that of SRT wheel. Castings can be returned back to us for re-bonding of rubber
when it is worn out.
Hardness of Rubber : (85 ± 5 ) on Shore ‘A’ scale.
Grade of the casting : FG 200 as per IS-210
0 Maximum Working Temperature : 50 C
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time
Diamensional details of V-groove, Square groove and Flange for
wheels having 25 mm width, 32 mm width and 50 mm width are
as per drawings given.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Hardness of Casting : ( 175 ±10 ) BHN.
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time.
Hardness of Casting : ( 175 ±10 ) BHN
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temp. : 250 C
Cast Iron wheels with either V-groove (VG), Square groove
(SQG), or a Flange (FLG) are available depending upon the track
over which the castors has to move. Since the wheels roll over
steel track, the pushing or pulling force required is much less,
reduces labour fatigue. Floor surface also does not get damage
at any time
Hardness of Casting : ( 175 ±10 ) BHN
These are bare cast iron wheels made from good quality graded casting, machinable &
free from blow holes. These wheels have very high load carrying capacity & are suitable
for high-temperature applications like ovens, foundries etc. The only disadvantage of CI
wheels is that they damage the costly floor surfaces.
Grade of Casting : FG 200 as per IS – 210
0 Maximum Working Temperature : 250 C
Hardness of Casting : ( 175 ±10 ) BHN
Laterally supported, housed spring type isolator with telescoping equipment support plate, leveling bolt and hold-down nut for attaching equipment.
Springs are supported with a cup on a metal base plate complete with a ribbed neoprene vibration isolation pad, 1/4″ (6 mm) thick, bonded to the base plate.
Steel telescoping housing incorporates neoprene stabilzers that prevent metal-to-metal contact while resisting movement and provides vertical damping.
Minimum 50% additional travel to solid
Minimum kx/ky ratio of 0.8
Open Spring Mount comprising laterally stable spring assembled into an upper & lower steel reinforced molded elastomeric load plate and with leveling assembly.
APPLICATION
It is used to isolate sources of noise and vibration of floor mounted equipment.
Reciprocating Air or Refrigeration Compressors
Internal Combustion Engines
Close Coupled & Base Mounted Pumps
Centrifugal Fans
Constructed from nylon fabric-reinforced neoprene body with forged carbon steel flanges.
Excellent for use with moderate chemicals, most oils, fats, grease, and many solvents.
Features
Non-skid neoprene acoustical isolation pad
Free and operating height
Top access adjustment bolt turn clockwise to load spring and maintain free and operating height
Bolt length is suitable for 1″ maximum Equipment Base thickness
These wheels are manufactured by compression molding shredded cotton fabric,
soaked in good quality phenolic resin. The hardness of fibre wheel is higher than the
hardness of UHMW wheel. As a result, the chances of steel burr lying on the shop floor
getting embedded in the wheel surface are remote. The acidic or alkaline chemicals have
little effect on these wheels.
Hardness of Wheel : ( 90 ± 5 ) on Shore ‘D’ scale.
0 Maximum Working Temperature : 170 C
Showing 1–12 of 26 results
